Practice Free 350-601 Exam Online Questions
Refer to the exhibit.
An engineer must configure infrastructure monitoring in a Cisco UCS domain to monitor traffic on the Cisco fabric interconnect A and Cisco fabric interconnect B port links connected to Cisco MDS switches SW1 and SW2. The monitored traffic must be sent to Cisco Intersight at 20 Gbps for further analysis.
Which command must be run on a UCS device after the create eth-mon-eession EthMonitor1/0 command is run?
- A . set direction transmit
- B . create fc-mon-session storage
- C . set speed 20gbps
- D . create dest-interface 1 1
Refer to the exhibit.
An engineer must implement a SPAN session that sends a copy of all VLAN 11 traffic on N5K_1 to the Traffic Capturing Device The configuration that is presented is already applied to the Cisco UCS Manager.
Which additional action meets the objective?
- A . Assign the VLAN to the monitored port.
- B . Choose VLAN 11 under the VSANs section.
- C . Select the Clear Destination feature.
- D . Create a LAN traffic monitoring session.
An engineer is configuring a vHBA template in Cisco UCS Manager. The engineer needs to specify the logical addresses used by the vHBA and the path through which the SAU Traffic flows.
Which two resources must be specified in the vHBA template? (Choose two)
- A . WWNN
- B . VLAN ID
- C . Fabric ID
- D . MAC addresses
- E . WWPN Pod
Which service profile is affected if the default host firmware policy in Cisco UCS Manager is changed?
- A . any service profile that has no host firmware policy defined
- B . any service profile that uses a user-created host firmware policy
- C . any service profile that is not in the root sub-org
- D . any service profile that uses the global-default host firmware policy
An engineer is implementing VSANs on a Cisco MDS 9000 Series Switch with a native Fibre Channel.
The deployment must meet these requirements:
• The host on port fc1/1 must be assigned to VSAN 10.
• The port channel 10 ISL must pass multiple VSANs, including VSAN 10.
Which configuration set meets these requirements?
- A . Create VSAN 10 in the YSAN database.
Bind VSAN 10 to interface fd/1 in the VSAN database.
Enable VSAN trunking on the ISL
Alow VSAN 10 on the ISL - B . Activate VSAN 10 in the vFC interface.
Associate VSAN 10 to interface vie 1/1.
Enable vsan F-port-channel-trunk on the ISL.
Set encapsulation EISL on the switch port - C . Disable VSAN 1 in the VSAN database
Assign VSAN 10 to the ISL
Enable VSAN trunking on the port channel members
Permit VSAN 10 in the FLOGI database. - D . Configure VSAN 10 In the interface configuration.
Attach VSAN 10 to the VSAN database.
Enable VSAN trunking on fd/1.Filter all VSAN on the ISL
A network engineer needs a tool to automate the provisioning of Cisco UCS Service Profiles. The administrator has limited programming knowledge but is skilled with scripting tools. The tool must include existing support for Cisco UCS configuration. Additionally, the administrator will eventually use the solution to manage Cisco UCS C-Series Rack Servers.
Which tool meets these requirements?
- A . Osco DCNM
- B . Python scripts
- C . PowerShell
- D . Bash scripts
Refer to the exhibit.
User1 and User2 are connected to VTEP1 switch. The users can reach the WEB server. The monitoring tool shows degrading network performance and excessive traffic is sent from User2 to reach the WEB server.
Which storm control percentage levels must be used to suppress traffic from User2 and allow all traffic types from User1?
- A . Level 0 on Eth1/1 and Level 100 on Eth1/2
- B . Level 0 on Eth1/2 and Level 0 on Eth1/5
- C . Level 0 on Eth1/2 and Level 100 on Eth1/1
- D . Level 100 on Eth1/1 and Level 100 on Eth1/5
Which component is upgraded by using an EPLD upgrade on a Cisco Nexus 9000 Series Switch?
- A . dual-homed fabric extenders
- B . BIOS
- C . field-programmable gate arrays
- D . ISSU of the NX-OS version
A network engineer must configure a vPC on a pair of Cisco Nexus switches connected to a third-party load balancer.
The connection must meet these requirements:
* The port channel must be negotiated with the load balancer via an open standards protocol.
* Traffic that is sent directly to the physical MAC address of the other peer switch must be forwarded locally by the receiving switch.
Which command set accomplishes these goals?
- A . vpe domain 10 peer-gateway interface Eth1/1 channel-group 1 mode on
- B . vpe domain 10 peer-switch interface Eth1/1 channel-group 1 mode on
- C . vpe domain 10 peer-switch interface Eth1/1 channel-group 1 mode active
- D . vpc domain 10peer-gateway interface Eth1/1 channel-group 1 mode active
Refer to the exhibit.
A network engineer must configure port E1/31- 32 to forward only storage server traffic of VLAN 200 on Cisco fabric interconnects A and B. Port E1/31- 32 is not reserved for any other traffic.
Which port type must be configured to accomplish this goal?
- A . unified uplink
- B . uplink
- C . FCoE uplink
- D . FCoE storage