Practice Free 350-601 Exam Online Questions
APIC EPG Resolution Immediacy is set to "Immediate".
Which statement is true about the Deployment Immediacy for VMM domains associated to EPGs?
- A . If "On demand" is selected, the policy is programmed in the hardware only when the first packet is received through the data path.
- B . If "Immediate" is selected, the policy is programmed in the hardware as soon as the leaf is booted.
- C . The "Immediate" and "On demand" options require a port group to be created on the VDS.
- D . If "On demand" is selected, the policy is programmed in the hardware only when the APIC detects a VM created in the EPG.
Refer to the exhibit.
An engineer is troubleshooting intermittent connect issues between the client PC and the DHCP server.
What does the last package captured from the Cisco Nexus 2000 Series Switch indicate?
- A . The client receives an IP address from the DHCP server.
- B . The DHCP server sends an IP address via a broadcast message.
- C . The client sends a unicast message to receive an IP address from the DCHP server.
- D . The DCHP server releases the IP address from the client.
An engineer troubleshoots a Fibre Channel deployment on a Cisco MDS 9000 Series Switch.
What does this output indicate about port channel 1?
- A . Port channel 1 is configured to be an ISL.
- B . Port channel 1 is configured to connect to an NPV switch.
- C . Port channel 1 is configured to connect to a host bus adapter.
- D . Port channel 1 is configured to connect to an NPIV switch.
Which two actions are needed to configure a single Cisco APIC controller for Cisco ACI fabric for the first time? (Choose two.)
- A . Register all leaf and spine switches.
- B . Register the APIC that is connected to the switch.
- C . Register the switches that are discovered through LLDP.
- D . Configure the first Cisco APIC controller.
- E . Configure the leaf switch where the Cisco APIC is connected, using CLI to allow APIC connectivity.
An engineer must design an automation solution for the Cisco ACI Fabric to speed up the deployment of logical network elements for tenant provisioning.
When creating a solution, the engineer must keep in mind that the tool must support these requirements:
* Allow the rapid creation and removal of logical containers.
* Support the creation of custom modules and data structures.
* Be extensible with external libraries and modules.
* Allow rapid testing of code using an on-demand execution environment.
Which automation tool meets these requirements?
- A . SaltStack
- B . YAML
- C . Chef
- D . Python
Refer to the exhibit.
The communication between the web server and the application server experiences poor performance. The network engineer must collect the traffic between the two servers, including the payload, for more investigation. The collected data must be sent from the remote site to the headquarters.
Which action accomplishes this goal?
- A . Configure NetFlow on N5K-1 to send the data to the monitor server.
- B . Configure SNMP on N5K-1 to send the data to the monitor server.
- C . Configure a SPAN session between N5K-1 and N5K-2.
- D . Configure an ERSPAN session between N5K-1 and N5K-2.
The engineer must configure SPAN on a Cisco Nexus 5000 Series Switch to get a capture of the traffic from these applications for an in-depth packet analysis.
Which two SPAN characteristics must be considered? (Choose two.)
- A . SPAN source ports can be monitored in multiple SPAN sessions.
- B . The Ethernet, FC, vFC, port channel, SAN port channel can be used as SPAN source ports.
- C . A SPAN source port cannot be a destination SPAN port.
- D . Only Ethernet, FC, vFC, port channel port types can be used as SPAN source ports.
- E . The rx/tx option is available for VLAN or VSAN SPAN sessions.
An engineer must deploy a Cisco UCS C-Series Server with a single VIC 1455 integrated into a Cisco UCS Manager cluster. Two fiber connections are available, and the deployment has no fabric extenders.
Which set of actions accomplishes this goal?
- A . Reset the system using Cisco IMC to its factory default settings.
Attach VIC port 1 and 3 to Fabric Interconnects. - B . Configure VIC attached ports as Uplink ports on fabric interconnects.
Insert 1000Base-T RJ45 SFP in VIC port 1 and 3. - C . Reset the system using Cisco IMC to its factory default settings.
Insert 1000Base-T RJ45 SFP in VIC port 1 and 3. - D . Configure VIC attached ports as Uplink ports on fabric interconnects.
Attach VIC port 1 and 3 to Fabric Interconnects.
Refer to the exhibit.
An engineer must set access to Cisco IMC. The access must be allowed by logging onto the https://datacenter.local web page. The configuration presented is on the Cisco UCS C240 Series Server.
Which set of commands completes the configuration?
A)
B)
C)
D)
- A . Option A
- B . Option B
- C . Option C
- D . Option D
What does WWPN uniquely identify in this Fibre Channel fabric?
- A . interface
- B . zone
- C . area
- D . switch