Practice Free 350-601 Exam Online Questions
Refer to the exhibit.
What is the result of this series of commands?
- A . It reboots the server immediately.
- B . It activates the firmware on the next adapter boot.
- C . It updates the firmware on adapter 1/1/1 immediately.
- D . It verifies the firmware update on the server.
DRAG DROP
Drag and drop the HyperFlex characteristics from the left onto the appropriate HyperFlex node types on the right.
Refer to the exhibit.
An engineer configures FCIP on a Cisco MDS 9000 Series switch.
What is the result of implementing the configuration?
- A . The switch attempts to make two TCP connections.
- B . Compression is performed by using hardware.
- C . Compression is performed by using software.
- D . Mode2 is enabled by default.
Which command reduces the amount of time it takes to complete the ISSU on a Cisco Nexus 7000 Series Switch that has dual supervisor modules and two I/O modules?
- A . insinstall all epld bootflash:<image> parallel
- B . install all kickstart <image> system <image> parallel
- C . install all kickstart <image> system <image>
- D . install all epld bootflash: <image>
Refer to the exhibit.
Two data center fabrics use VPC data center interconnect. The system MAC value on SW1 is 00:23:04: ee: be:20.
Which value must be set to configure the system MAC address?
- A . 00:23:04: ee: be:14 on SW3
- B . 00:23:04: ee: be:20 on SW3
- C . 00:23:04: ee: be:14 on SW2
- D . 46:43:32: e5:92:80 on SW2
A network engineer must download a firmware image from a remote location to a Cisco UCS Fabric Interconnect. The software bundle is over 232 MB in size. The file transfer must use encryption and authentication.
Which protocol must be used to accomplish this goal?
- A . TFTP
- B . SCP
- C . RDP
- D . HTTPS
Which component is disrupted when the Cisco Integrated Management Controller is upgraded on a Cisco UCS Series Server?
- A . SAN traffic
- B . Cisco UCS Manager
- C . KVM sessions
- D . data traffic
What is the impact of a nondisruptive upgrade on fabric and modular switches?
- A . The upgrade disrupts the control plane for more than 120 seconds.
- B . During the upgrade, new devices cannot log in to the fabric.
- C . If a zone server merge is in progress, the upgrade continues without interruption.
- D . When the installation is complete, the system BIOS must be updated.
DRAG DROP
An engineer must configure HSPR protocol on two Cisco Nexus 9000 Series Switches running a virtual port channel.
In addition, the HSRP implementation must meet these requirements:
✑ It must allow more than 500 groups.
✑ switch1 must act as the primary switch.
✑ Both switches must use a user-defined hardware address.
Drag and drop the commands from the right to complete a configuration of the HSRP on the left. The commands are used more than once. Not all commands are used.
An engineer is configuring a vHBA template in UCS Manager. The engineer needs to specify the logical addresses used by the vHBA and the path through which the SAN traffic flows.
Which two resources must be specified in the vHBA template? (Choose two.)
- A . MAC addresses
- B . WWPN Pool
- C . WWNN
- D . Fabric ID
- E . VLAN ID