Practice Free 350-601 Exam Online Questions
Which adjacency server configuration makes two OTV edge devices located in the same site bring up the dual-site adjacency?
A)
B)
C )
D)
- A . Option A
- B . Option B
- C . Option C
- D . Option D
DRAG DROP
Drag and drop the mechanisms to collect data from a network from the left onto their characteristics on the right.
Refer to the exhibit.
An engineer needs to implement a monitoring session that should meet the following requirements:
✑ Monitor traffic from leaf to leaf switches on a Cisco ACI network
✑ Support filtering traffic from Bridge Domain or VRF
Which configuration must be added to meet these requirements?
- A . interface eth 1/2 leaf 101
- B . application epg epg1 app1
- C . interface eth 1/2 switch 101
- D . application app1 epg epg1
Which two configuration settings are available in the Cisco UCS Firmware Auto Sync Server policy? (Choose two.)
- A . Immediate Action
- B . User Notification
- C . User Acknowledge
- D . Delayed Action
- E . No Action
What is the benefit of adding Cisco HyperFlex Hardware Acceleration Cards to a HyperFlex deployment?
- A . increased compression efficiency
- B . increased network throughput
- C . GPU acceleration
- D . offline encryption acceleration
What is the benefit of adding Cisco HyperFlex Hardware Acceleration Cards to a HyperFlex deployment?
- A . increased compression efficiency
- B . increased network throughput
- C . GPU acceleration
- D . offline encryption acceleration
Which device alias database is shown by this output?
switch# show device-alias database
device-alias name SampleName pwwn 24:40:00: e7:09:0b:27:56
- A . inactive database
- B . effective database
- C . pending database
- D . zoning database
DRAG DROP
An engineer configures the NetFlow feature on a Cisco NX-OS device. The requirement is to reduce the amount of export data collected by using a sampler.
Drag and drop the NetFlow configuration steps from the left onto the implementation needed to meet these requirements on the right. Not all steps are used.
A small remote office is set to connect to the regional hub site via NSSA ASBR.
Which type of LSA is sent to the remote office OSPF area?
- A . type 7 LSA
- B . type 1 LSA
- C . type 5 LSA
- D . type 3 LSA
An engineer is implementing VSANs on a Cisco MDS 9000 Series Switch with a native Fibre Channel.
The deployment must meet these requirements:
• The host on port fc1/1 must be assigned to VSAN 10.
• The port channel 10 ISL must pass multiple VSANs, including VSAN 10.
Which configuration set meets these requirements?
- A . Activate VSAN 10 in the vFC interface.
Associate VSAN 10 to interface vfc 1/1.
Enable vsan F-port-channel-trunk on the ISL.
Set encapsulation EISL on the switch port. - B . Create VSAN 10 in the VSAN database.
Bind VSAN 10 to interface fc1/1 in the VSAN database.
Enable VSAN trunking on the ISL.
Allow VSAN 10 on the ISL. - C . Configure VSAN 10 in the interface configuration.
Attach VSAN 10 to the VSAN database.
Enable VSAN trunking on fc1/1.
Filter all VSAN on the ISL. - D . Disable VSAN 1 in the VSAN database.
Assign VSAN 10 to the ISL.
Enable VSAN trunking on the port channel members.
Permit VSAN 10 in the FLOGI database.