Practice Free 350-601 Exam Online Questions
An engineer is seeking the most optimal on demand CPU performance while configuring the BIOS settings of UCS C-series rack mount server.
- A . C0/C1 state
- B . C6 Retention
- C . C2 state
- D . C6 non-retention
A network engineer must enable port security on all cisco MDS series switches in the fabric. The requirement is to avoid the extensive manual configuration of the switch ports.
Which action must be taken to meet these requirements?
- A . Activate CFS distribution and the auto-learning port security feature.
- B . Activate CFS distribution and the auto-learning port security feature on a per-VSAN basis.
- C . Enable the auto-learning port security feature on a per-VSAN basis.
- D . Enable the auto-learning port security feature.
An engineer must configure a Cisco MDS 9000 Series Switch to store generated log messages to a file. The tile must store logs of the severity of ‘warning" and above, and the file size must not exceed 20.000 bytes.
Which command accomplishes this task?
- A . logging logfile Local 4 size 20000
- B . logging logfile Logs 3 size 160000
- C . logging logfile messages 2 size 2500
- D . logging logfile LogFile S size 2000
An engineer must perform a nondisruptive software upgrade on a dual supervisor Cisco Nexus 7000 series switch.
What is the cause of the upgrade being disruptive?
- A . The show install all impact command is not issued before the upgrade.
- B . The kickstart image is installed by using the
- C . Attempt to simultaneously upgrade more than three cards
- D . Change to the configuration setting of the network connections during the upgrade process
What is a benefit of using the Cisco UCS Lightweight upgrade feature?
- A . The firmware version of a component e updated only when it has boon modified.
- B . A sod reboot is available for the fabric interconnects
- C . Security updates are scheduled with the next reboot d the fabric interconnects.
- D . All servers are rebooted to push the latest updates.
A network engineer repeatedly saves a configuration on Catalyst switches to NVRAM using the write memory command.
What action should be taken to implement the same action on Nexus switches?
- A . Use the exit command to leave the configuration mode and save the configuration automatically.
- B . Use the write memory command to save the configuration.
- C . Use the alias command to use the write memory command.
- D . Use the wri command to use the copy running-config startup-config command.
An engineer must configure a user role interface policy on a Cisco Nexus 9000 Series Switch. The role must prevent access to interface FC3/2 but allow access to interface FC3/1.
Which set of actions must be taken to accomplish this goal?
- A . Configure deny interface policy. Deny interface FC3/2. Permit interface FC3/1.
- B . Configure permit interface policy. Deny interface FC3/2. Deny interface FC3/1,
- C . Configure permit interface policy. Permit interface FC3/2. Permit interface FC3/1.
- D . Configure deny interface policy. Permit interface FC3/2. Deny interface FC3/1.
Refer to the exhibit.
An engineer must access a Cisco UCS C-Series server KVM from a remote location. The engineer must use the out-of-band interface to access the KVM.
Which configuration set meets these requirements?
- A . NIC mode: Dedicated VLAN ID: 101
- B . NIC mode: Shared LOM vlan state: Disabled
- C . NIC mode Shared LOM VLAN ID 100
- D . NIC mode Dedicated VLAN state Disabled
DRAG DROP
Drag and drop the hyperflex characteristics from the left onto the appropriate. HyperFlex Node types on the right. Not all options are used.
Explanation:
Hybrid:
uses only SSD drives for caching
contains HDDs for the capacity layer
recommended for capacity-sensitive solutions, lower budgets, and fewer performance-sensitive applications
All Flash Node:
uses SSD drives or NVMe storage for caching
has SSD drives for the capacity layer
recommended for repeatable and sustainable high performance, especially for scenarios with a larger working set of data
The network team needs permissions to access the Cisco UCS B-Series Servers via the Cisco UCS Manager GUI to configure the network and collect information about faults. The administrator wants to assign these permissions to the newly configured user called netops.
Which set of tasks must the administrator perform to accomplish these goals?
- A . Deploy username noteps on the users locales. Assign the roles of network security and facility manager.
- B . Implement username netops on the locally authenticated user. Assign the roles of network administrator and operations.
- C . Enable username netops on the authenticated users. Assign the roles of storage administrator and facility manager.
- D . Configure username netops on the Cisco UCS Manager login profile. Assign the roles of AAA administrator and operations.