Practice Free 300-120 Exam Online Questions
Which of the following is a good way to confirm good roaming performance during a post-deployment survey?
- A . Fewer than three channels scanned before the client associates to the next AP
- B . 50 ms or less between the last data packet on the previous AP and the first data packet on the next AP
- C . 30 ms or less between the probe request and the association request on the next AP
- D . Less than 10% packet loss in the roaming area between APs
An engineer is using Cisco Prime Infrastructure reporting to monitor the state of security on the WLAN.
Which output is produced when the Adaptive wIPS Top 10 AP report is run?
- A . last 10 wWIPS events from monitor mode APs
- B . last 10 wIPS events from sniffer mode APs
- C . last of 10 sniffer mode APs with the most wIPS events
- D . last of 10 monitor mode APs with the most wIPS events
Regarding AAA and the relationship among its components, what is illustrated by the question mark in the following figure?
- A . LDAP
- B . Authentication store
- C . Identity proxy
- D . Identity store
You installed a brand-new firewall between your WLC and CMX appliance. Now your CMX service does not get location updated anymore.
What port needs to be opened on the firewall for location information to flow through?
- A . TCP 16113
- B . UDP 5246
- C . UDP 5247
- D . TCP 1812
Which one of the following parameters is used to estimate a client device’s location in a wireless network?
- A . Wireless MAC address
- B . Ping response times
- C . Phase differential
- D . Received signal strength
What is represented by the question mark in the following figure?
- A . TACACS rule
- B . TACACS logs
- C . TACACS access
- D . TACACS profile
Which controller role is missing from the following figure (at the question mark)?
- A . Anchor wireless LAN controller
- B . Guest wireless LAN controller
- C . DMZ wireless LAN controller
- D . Root foreign wireless LAN controller
Which two steps are needed to complete integration of the MSE to Cisco Prime Infrastructure and be able to track the location of clients/rogues on maps? (Choose two.)
- A . Synchronize access points with the MSE
- B . Add the MSE to Cisco Prime Infrastructure using the CLI credentials
- C . Add the MSE to Cisco Prime Infrastructure using the Cisco Prime Infrastructure communication credentials configured during set up
- D . Apply a valid license for Wireless Intrusion Prevention System
- E . Apply a valid license for location tracking
How many access categories does 802.11e EDCA and WMM defines?
- A . Four
- B . Three
- C . Two
- D . Five
Implementation of 802.1X on an access point requires three steps.
Put the following steps in the correct order:
I. Configure ISE with the correct security policies to authenticate and authorize traffic from the AP.
II. Enable the 802.1X supplicant on the AP (either globally or on a per-AP basis).
III. Configure the local switch port with 802.1X and the back-end ISE server as the authentication server
- A . II, I, III
- B . II, III, I
- C . III, I, II
- D . I, III, II