Practice Free 300-120 Exam Online Questions
A network engineer has been hired to perform a new MSE implementation on an existing network. The MSE must be installed in a different network than the Cisco WLC.
Which configuration allows the devices to communicate over NMSP?
- A . Allow UDP/16113 port on the central switch.
- B . Allow TCP/16113 port on the firewall.
- C . Allow UDP/16666 port on the VPN router.
- D . Allow TCP/16666 port on the router.
Which minimum iOS version does an Apple client need to be running to take advantage of the Fastlane QoS feature to provide increased QoS treatment?
- A . iOS 9
- B . iOS 10
- C . iOS 11
- D . iOS12
Which of the following is a true statement regarding using multicast mode on wireless LAN controllers?
- A . A Cisco Mobility Express controller does not support AP multicast mode
- B . When you enable multicast mode on a controller, you need not configure a CAPWAP multicast group address.
- C . Multicast frames require ACK.
- D . APs in monitor mode, sniffer mode, or rogue detector mode can join the CAPWAP multicast group address.
Which of the following are valid reports available from Cisco Prime Infrastructure?
- A . Autonomous APs
- B . Compliance
- C . Guest
- D . Performance
- E . Security
- F . Clean-Fair
- G . Raw-Netstat
Which component is the root of a Wi-Fi mesh?
- A . WGB
- B . The controller
- C . RAP
- D . MAP
Where can the web portal reside with Local Web Authentication (LWA)?
- A . IDS (intrusion detection system)
- B . Wireless client
- C . Wireless LAN controller
- D . Remote server
The Cisco Hyperlocation detection threshold is currently set to -50 dBm. After reviewing the wireless user location, discrepancies have been noticed. To improve the Cisco Hyperlocation accuracy, an engineer attempts to change the detection threshold to -100 dBm.
However, the Cisco Catalyst 9800 Series Wireless Controller does not allow this change to be applied.
What actions should be taken to resolve this issue?
- A . Disable Cisco Hyperlocation, change the Cisco Hyperlocation detection threshold, and then enable it.
- B . Create a new profile on Cisco CMX with the new Cisco Hyperlocation detection range, and apply it on the WLAN.
- C . Place the APs to monitor mode, shutdown the radios, and then change Cisco Hyperlocation detection threshold.
- D . Shutdown all radios on the controller, change the Cisco Hyperlocation detection range, and enable the radios again.
What is required on ISE to implement 802.1X for access points?
- A . Radius attributes specific for Cisco APs
- B . Policy sets
- C . Policy groups
- D . TACACS+ with CoA
In the context of Cisco wireless networks, what is a rogue client?
- A . An 802.11 device that connects and disconnects from your WLAN at fast pace
- B . An 802.11 device connected to your 802.1X WLAN with “Unknown” as the user name
- C . One of your 802.11 clients connected to a WLAN that is not under your control
- D . One client of a neighboring WLAN (not under your control) connected to your WLAN
An _____ is a Cisco Prime Infrastructure response to one or more related _____.
- A . alarm, events
- B . events, alarm
- C . assurance, events
- D . events, assurance