Practice Free MB-335 Exam Online Questions
You need to plan scheduling for Customer1’s order of unscented solution.
What are two possible ways to achieve the goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.
- A . Schedule production based on the availability of raw material.
- B . Split and plan operations in detail for each of the resources.
- C . Schedule productions based on the capacity of the resources.
- D . Run master planning with a specific time fence.
- E . Plan scheduling of the production at the resource group level.
DRAG DROP
A manufacturer sends wiring harnesses to a vendor to be soldered to a connector. You create the subcontracting process in the bill of materials (BOM) and route to account for the items sent to the vendor.
You need to set up a new item model group for the service item.
Which three actions should you perform? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
DRAG DROP
A manufacturer is implementing Dynamics 365 Supply Chain Management to create blends of oil and industrial lubricant.
The manufacturer requires detailed documentation for the production order process before manufacturing begins for the products. The shop floor must review, approve, and anticipate all production runs. Before production starts, the manufacturer wants to ensure that the order can be completed by a certain timeframe based on capacity. You need to define the production life cycle stages.
Which five actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Explanation:
To define the production life cycle stages, you should perform the following actions in sequence:
Create a production order. A production order is a document that authorizes the production of a specific product or product variant in a given quantity on a specific date1. You can create a production order manually, from a sales order line, or from master planning execution2.
Estimate the order. Estimating a production order calculates the material and capacity requirements for the order based on the bill of materials (BOM) and the route3. You can also estimate the cost and revenue of the order based on the planned consumption and output.
Schedule production jobs. Scheduling production jobs determines the start and end dates and times for each operation in the route based on the available capacity, efficiency, and calendar of the resources. You can use either operations scheduling or job scheduling methods to schedule production jobs.
Release the order. Releasing a production order makes it available for picking, production, and reporting activities. You can release an order manually or automatically based on a release rule that specifies criteria such as site, warehouse, status, priority, or start date.
Generate a picking list. A picking list is a document that lists the materials that must be picked from inventory and consumed for production. You can generate a picking list for an entire production order or for selected jobs or operations within an order.
1: Production process overview
2: Production order lifecycle overview
3: Estimate a production order: [Estimate cost and revenue for a production order]: [Schedule production jobs]: [Scheduling methods]: [Release a production order]: [Release rules]: [Picking list overview]: [Generate picking lists]
DRAG DROP
A glass bottle manufacturer uses route operations to schedule resources and track manufacturing costs.
The company has recently seen an increase in demand and purchases another resource that costs more to run. The company uses the same costs per resource. The company must be able to track cost contributions for the new resource.
You need to create a cost category for the new resource.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. NOTE: More than one order of answer choices is correct You will receive credit for any of the correct orders you select.
DRAG DROP
You need to configure the production requirements of the controller.
What should you configure? To answer, move the appropriate configurations to the correct requirements. You may use each configuration once, more than once, or not at all. You may need to move the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.
HOTSPOT
A company uses a Dynamics 365 Supply Chain Management.
The company requires rebate reduction principles so it can accurately manage rebate calculations.
The principles must manage overlapping rebate deals and reduce rebates quarterly.
You need to configure the rebate reduction principles to meet the requirements.
What should you configure? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
You need to configure production control parameters for liquid cleaning solution manufacturing.
What are two possible ways to achieve this goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.
- A . Require an electronic signature when the formula is approved.
- B . Select Block editing and approve the formula.
- C . Select the Block removal of approval option for the formula
- D . Select the Block editing option only.
BC
Explanation:
Reference: https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/formulas-versions
You need to configure lot number control for inventory.
Which option should you use?
- A . Physical inventory
- B . Blank receipt allowed
- C . Blank issue allowed
- D . Primary socking
HOTSPOT
A company manufactures high-end speaker systems. You have different configurations available for customers to customize features, including finishes and speaker materials. You have a product configuration model with bill of material lines and conditions for each component.
A customer can optionally add on protective covers, but only if a metal material is selected. If any other material is selected, the covers cannot be added.
You add the following attributes:
You need to create an expression-based constraint that will only allow Corner Protection if Metal is selected.
How should you complete the expression? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
HOTSPOT
A company uses Dynamics 365 Supply Chain Management. Technicians travel to several facilities to complete routine maintenance on equipment.
The company recently invested in new equipment. The technicians have no experience maintaining the new equipment.
The technicians must be able to perform the following activities:
• Use apps on their mobile device to complete the maintenance.
• Find links to any visual step-by-step instructions related to the new equipment.
You need to configure features to assist the technicians.
Which features must you configure? To answer, select the appropriate options in the answer area.
