Practice Free NACE-CIP1-001 Exam Online Questions
Question #21
When using the ISO comparator in accordance with ISO 8503, if the surface profile does not directly compare to one of the four segments the inspector should:
- A . Use another method as the comparator method is too subjective
- B . Record the segment with the more aggressive profile
- C . Record the segment with the less aggressive profile
- D . Record your result by identifying two segments
Correct Answer: C
Question #22
Non Conformance Reports are completed by the Inspector:
- A . In every instance that an item does not meet the specification requirements
- B . When the Inspector deems it to be a significant non-conforming item
- C . When the Inspector and Contractor deem it to be a significant non-conforming item
- D . In accordance with the specification’s definition of a non-conformance
Correct Answer: C
Question #23
On a blast-cleaned surface, Ian ultraviolet light is generally used to detect
- A . soluble chemical salts
- B . grease and oil
- C . inhibitor residues
- D . sulfates
Correct Answer: B
Question #24
A NACE Coating Inspector is permitted to transport coating material when:
- A . Asked to do so by the Coating Application team
- B . Asked to do so by the Owner’s Representative
- C . The Inspector should never transport coating material
- D . If the Inspector meets all the necessary requirements for Transportation of Dangerous Goods
Correct Answer: C
Question #25
ASTM Standards are applicable:
- A . In the USA
- B . In North America
- C . In Asia
- D . When specified
Correct Answer: D
Question #26
When performing tests for oil and grease using an ultra-violet light, the NACE Inspector should be aware that:
- A . Chloride salt may produce a false positive
- B . Synthetic oil or grease may not be identified
- C . Ultra-Violet light may contaminant the surface
- D . Presence of weld spatter may produce a false positive
Correct Answer: B
Question #27
To achieve consistently accurate results with ALL alt test equipment
- A . wear gloves when sampling.
- B . wash your hands before sampling.
- C . avoid placing the sample discs on a surface.
- D . calibrate the instrument in the field.
Correct Answer: B
Question #28
ISO SA 2 is defined as:
- A . Near White Metal Blasting
- B . Thorough Blast Cleaning
- C . Very Thorough Blast Cleaning
- D . Light Blast Cleaning
Correct Answer: B
Question #29
Safety Data Sheets must be carefully reviewed by:
- A . The Application personnel
- B . The Inspection personnel
- C . The Owner’s personnel
- D . All personnel involved in the job
Correct Answer: D
Question #30
Excessive working of the surface with a power grinder can be detrimental because excessive burnishing
- A . scratches the surface too deeply resulting in uneven coating application
- B . develops a polished surface, which is a poor anchor profile for most coatings
- C . damages structural elements thereby speeding up the corrosion process.
- D . develops a good anchor profile resulting in uneven coating application.
Correct Answer: B