Practice Free HPE7-A02 Exam Online Questions
Refer to the exhibit.
You are reviewing packets in Wireshark. The capture shows traffic from source IP address 10.1.14.10 to several destinations in the 10.1.15.0/24 network. The packets use TCP flags FIN, PSH, and URG together.
What can you interpret from the packets that you see here?
- A . 10.1.14.10 might be running a TCP port scan, but it may simply be trying to open TCP sessions with several destinations.
- B . 10.1.14.10 is almost certainly running a TCP port scan because this type of packet does not legitimately exist.
- C . 10.1.14.10 is launching a denial-of-service attack against Windows machines in 10.1.15.0/24.
- D . 10.1.14.10 is showing some signs of launching a DoS attack, but might simply be misconfigured.
Refer to the exhibit.
You are reviewing packets in Wireshark. The capture shows traffic from source IP address 10.1.14.10 to several destinations in the 10.1.15.0/24 network. The packets use TCP flags FIN, PSH, and URG together.
What can you interpret from the packets that you see here?
- A . 10.1.14.10 might be running a TCP port scan, but it may simply be trying to open TCP sessions with several destinations.
- B . 10.1.14.10 is almost certainly running a TCP port scan because this type of packet does not legitimately exist.
- C . 10.1.14.10 is launching a denial-of-service attack against Windows machines in 10.1.15.0/24.
- D . 10.1.14.10 is showing some signs of launching a DoS attack, but might simply be misconfigured.
A company has an HPE Aruba Networking ClearPass cluster with several servers.
ClearPass Policy Manager (CPPM) is set up to:
. Update client attributes based on Syslog messages from third-party appliances
. Have the clients reauthenticate and apply new profiles to the clients based on the updates
To ensure that the correct profiles apply, what is one step you should take?
- A . Configure a CoA action for all tag updates in the ClearPass Device Insight integration settings.
- B . Tune the CoA delay on the ClearPass servers to a value of 5 seconds or greater.
- C . Set the cluster’s Endpoint Context Servers polling interval to a value of 5 seconds or less.
- D . Configure the cluster to periodically clean up (delete) unknown endpoints.
A company has an HPE Aruba Networking ClearPass cluster with several servers.
ClearPass Policy Manager (CPPM) is set up to:
. Update client attributes based on Syslog messages from third-party appliances
. Have the clients reauthenticate and apply new profiles to the clients based on the updates
To ensure that the correct profiles apply, what is one step you should take?
- A . Configure a CoA action for all tag updates in the ClearPass Device Insight integration settings.
- B . Tune the CoA delay on the ClearPass servers to a value of 5 seconds or greater.
- C . Set the cluster’s Endpoint Context Servers polling interval to a value of 5 seconds or less.
- D . Configure the cluster to periodically clean up (delete) unknown endpoints.
A company has an HPE Aruba Networking ClearPass cluster with several servers.
ClearPass Policy Manager (CPPM) is set up to:
. Update client attributes based on Syslog messages from third-party appliances
. Have the clients reauthenticate and apply new profiles to the clients based on the updates
To ensure that the correct profiles apply, what is one step you should take?
- A . Configure a CoA action for all tag updates in the ClearPass Device Insight integration settings.
- B . Tune the CoA delay on the ClearPass servers to a value of 5 seconds or greater.
- C . Set the cluster’s Endpoint Context Servers polling interval to a value of 5 seconds or less.
- D . Configure the cluster to periodically clean up (delete) unknown endpoints.
A company has an HPE Aruba Networking ClearPass cluster with several servers.
ClearPass Policy Manager (CPPM) is set up to:
. Update client attributes based on Syslog messages from third-party appliances
. Have the clients reauthenticate and apply new profiles to the clients based on the updates
To ensure that the correct profiles apply, what is one step you should take?
- A . Configure a CoA action for all tag updates in the ClearPass Device Insight integration settings.
- B . Tune the CoA delay on the ClearPass servers to a value of 5 seconds or greater.
- C . Set the cluster’s Endpoint Context Servers polling interval to a value of 5 seconds or less.
- D . Configure the cluster to periodically clean up (delete) unknown endpoints.
A company has an HPE Aruba Networking ClearPass cluster with several servers.
ClearPass Policy Manager (CPPM) is set up to:
. Update client attributes based on Syslog messages from third-party appliances
. Have the clients reauthenticate and apply new profiles to the clients based on the updates
To ensure that the correct profiles apply, what is one step you should take?
- A . Configure a CoA action for all tag updates in the ClearPass Device Insight integration settings.
- B . Tune the CoA delay on the ClearPass servers to a value of 5 seconds or greater.
- C . Set the cluster’s Endpoint Context Servers polling interval to a value of 5 seconds or less.
- D . Configure the cluster to periodically clean up (delete) unknown endpoints.