Practice Free D-PE-OE-23 Exam Online Questions
A company needs a server that meets these requirements:
– Support workloads that are accelerated and computational-heavy
– Has cyber resilient architecture and Root of Trust
– Supports HPR fans
– Supports OCP 3.0 technology
Which Dell PowerEdge server model meets these requirements?
- A . R960
- B . XE9680
- C . MX760c
A Dell PowerEdge R740 server with two CPUs has six memory modules that are attached to each CPU. Memory Optimizer mode is configured. The user now wants to have maximum protection for the memory but cannot afford to lose any memory space.
What should be installed or configured?
- A . No additional memory
Switch to Memory Mirroring - B . Six additional memory modules matching the original
Switch on Single Rank Spare Mode - C . Twelve additional memory modules matching the original (six for each CPU)
Switch to Memory Mirroring - D . No additional memory
Switch on Single Rank Spare Mode
A technician deletes the iDRAC Enterprise license on a R640 server.
Which license type is then enabled?
- A . iDRAC Express license
- B . iDRAC will not have a license until a new one is installed
- C . iDRAC Basic license
- D . iDRAC Enterprise license cannot be deleted
What is a valid password option available from the iDRAC9 Unique ID feature?
- A . Encryption Default
- B . Secure Default
- C . Legacy Generated
- D . Randomly Generated
The Support Assist Setup Wizard is displayed only for users who are part of the Support Assist Admins group. Your administrator has added you to the group, but you are still having connection issues when you launch your browser.
What did you fail to configure?
- A . L2TP Server for connection to https://emc.dell.com
- B . Proxy Server for connection to https://api.dell.com
- C . L2TP Server for connection to https://api.dell.com
- D . Proxy Server for connection to https://dell.com/support
A server has two power supply units (PSUs) in a redundant configuration. One power supply unit fails. A technician replaces the failed PSU, but the server does NOT return to redundant power mode.
What is the cause of this issue?
- A . The new PSU has a different wattage than the existing PSU.
- B . The server has NOT been Power Cycles to bring the new PSU online.
- C . The power redundant options is disabled in the System Setup Utility.
- D . Both PSUs were NOT replaced at the same time.
A server has two power supply units (PSUs) in a redundant configuration. One power supply unit fails. A technician replaces the failed PSU, but the server does NOT return to redundant power mode.
What is the cause of this issue?
- A . The new PSU has a different wattage than the existing PSU.
- B . The server has NOT been Power Cycles to bring the new PSU online.
- C . The power redundant options is disabled in the System Setup Utility.
- D . Both PSUs were NOT replaced at the same time.
What is a benefit of an OCP network card?
- A . Allows for link aggregation with the LOM.
- B . Shares a connector with the NDC.
- C . Designed for the Open Connector Framework.
- D . Provides speed and interface flexibility.
A server has the following configuration:
– 5x 1 TB drives configured in a RAID 5 array
– 1x 1 TB as a global hot spare
– Persistent Hot Spare Slot enabled
A user adds one additional 2 TB drive to the existing array using RAID migration.
How much disk space is available to the operating system?
- A . 5 TB
- B . 6 TB
- C . 7 TB
- D . 8 TB
What is the minimum number of components, beside the system board, required to POST?
- A . 1 PSU, 1 DIMM, and 1 CPU only
- B . 1 PSU, 1 CPU, 1 DIMM, and PERC SAS controller
- C . 1 PSU and 1 CPU only
- D . PSUs, CPUs, and DIMMs as configured in BIOS