Practice Free D-PE-OE-23 Exam Online Questions
Starting from which Dell EMC PowerEdge server hardware generation is the Micro SD card in the IDSDM/vFlash module supported?
- A . 11G
- B . 12G
- C . 13G
- D . 14G
A new server with default iDRAC network configurations is plugged into a segregated management network configured for 10.0.0.x/24. The technician cannot connect to the iDRAC.
How can the on-site technician configure the iDRAC for network access?
- A . Change iDRAC network settings from a workstation on the management network
- B . Perform an AC power cycle to reset the iDRAC
- C . Modify the iDRAC settings using the iDRAC Direct feature
- D . Configure a DHCP reservation for the iDRAC MAC address
A technician wants to move memory from a few older system into a newer system.
What is the most efficient method for the technician to accomplish this task?
- A . Back up the server profile on the older server, move the matching memory, and import the server profile to the new server
- B . Use iDRAC to view the memory details of the older systems. Power down the servers to move matching memory to the new server
- C . Power down any of the older servers to move any memory to the new server, update BIOS to allow mis-matched memory.
- D . Power down all of the older servers to physically check the memory. Move any matching memory to the new server.
A technician wants to move memory from a few older system into a newer system.
What is the most efficient method for the technician to accomplish this task?
- A . Back up the server profile on the older server, move the matching memory, and import the server profile to the new server
- B . Use iDRAC to view the memory details of the older systems. Power down the servers to move matching memory to the new server
- C . Power down any of the older servers to move any memory to the new server, update BIOS to allow mis-matched memory.
- D . Power down all of the older servers to physically check the memory. Move any matching memory to the new server.
What is a requirement to operate GPUs in a Dell EMC PowerEdge R740 server?
- A . All GPU cards must be installed at the same time
- B . All GPU cards must be of the same type but can be a different model
- C . All GPU cards must be of the same type and model
- D . All GPU cards must be installed on the same riser card
How can a technician know whether IDRAC9 System Lockdown mode is enabled?
- A . Lockdown activation message in red box in the iDRAC web GUI Access to LCC is disabled when the server boots
- B . Lockdown activation message in yellow box in the iDRAC web GUI Access to LCC is disabled when the server boots
- C . Lockdown activation message in red box in the iDRAC web GUI Access to LCC requires a password when the server boots
- D . Lockdown activation message in yellow box in the iDRAC web GUI Access to LCC requires a password when the server boots
A Dell EMC PowerEdge R740 server requires a vFlash SD card urgently. Additional vFlash Cards and components from other servers are available.
What is the recommended solution?
- A . Use a configuration option to convert an NVMe drive to a virtual vFlash
- B . Use a configuration option to convert BOSS to a virtual vFlash
- C . Reuse an existing vFlash SD card from a 14G server
- D . Reuse an existing vFlash SD card from either a 13G or 14G server
Which two tools provide a user interface to manage the Boot Optimized Storage Solution (BOSS) cards? (Select 2)
- A . OpenManage Mobile (OMM)
- B . Intelligent Platform Management Interface Tool (IPMITool)
- C . Integrated Dell Remote Access Controller (iDRAC)
- D . OpenManage Server Administrator (OMSA)
- E . Remote Access Controller Admin (RACADM)
A technician receives a repurposed Dell EMC PowerEdge server. The server already has the OS and the Dell Tools software installed. After racking and cabling the server, the technician attempts to log into the iDRAC but cannot do so.
The default login account has been disabled.
What method can be used to enable the default login account?
- A . SSH into the iDRAC and run the racadm racresetcfg command
- B . Run the racadm racreset command from the host OS
- C . Run the racadm racresetcfg command from the host OS
- D . SSH into the iDRAC and run the racadm racreset command
A technician needs to configure a server to allow the OS to manipulate processor frequencies for higher power efficiency.
How should the technician perform this task?
- A . Enable Adjacent Cache Line Prefetch
- B . Enable Logical Processing
- C . Enable Performance per Watt (DAPC)
- D . Enable Performance per Watt (OS)