Practice Free D-PE-OE-01 Exam Online Questions
A technician needs to analyze a server that is using more power than expected. The server is part of a cluster that runs jobs between 8 AM and 5 PM. The cluster is not used at other times of the day. The server runs an unsupported OS. Performance while jobs are running is a key consideration.
Which option should the technician choose from within System Profile Settings within System Setup to address this issue?
- A . Dense Configuration
- B . Performance Per Watt (DAPC)
- C . Performance
- D . Performance Per Watt (OS)
What is an advantage of using virtual media from a management station?
- A . ISO can be transferred to the server using a USB flash drive.
- B . No physical presence is required at the data center.
- C . Remote file shares are supported.
- D . Management station can be separated from the server by firewalls or a DMZ.
B
Explanation:
Advantages of Using Virtual Media from a Management Station Server Management and Configuration Tools (14%)
Define the function of the iDRAC, login procedures, licensing, and connection methods Explain the management interface options – LCC, racadm, OMSA, iSM, OME
Understanding Virtual Media
Virtual Media allows administrators to remotely mount media devices (such as CD/DVD drives or ISO images) over the network to a server via the Integrated Dell Remote Access Controller (iDRAC). Purpose: Enables tasks like installing an operating system, updating firmware, or running diagnostics without needing physical access to the server.
Advantages
Option B: No physical presence is required at the data center
Remote Accessibility: Administrators can perform necessary tasks from any location, eliminating the need to be physically present at the server’s location.
Efficiency: Reduces travel time and costs associated with onsite visits.
Business Continuity: Allows for prompt responses to issues, minimizing downtime.
Dell Operate
Reference: Server Management and Configuration Tools (14%): Highlights the importance of remote management capabilities provided by tools like iDRAC and the Virtual Console.
Explanation of Other Options
Option A: ISO can be transferred to the server using a USB flash drive
Analysis: This involves physical transfer and insertion of a USB drive into the server, which contradicts the advantage of using virtual media remotely.
Conclusion: Not an advantage of virtual media from a management station.
Option C: Remote file shares are supported
Analysis: While some virtual media implementations may support remote file shares, the primary advantage is the ability to mount media remotely, not necessarily accessing file shares. Conclusion: Less accurate than Option B.
Option D: Management station can be separated from the server by firewalls or a DMZ Analysis: Firewalls and DMZs can actually hinder the use of virtual media due to blocked ports or security restrictions.
Conclusion: Not an advantage and may present challenges.
Conclusion
Using virtual media from a management station provides the significant advantage of allowing administrators to perform tasks without needing to be physically present at the data center. This enhances operational efficiency and responsiveness.
A technician deletes the iDRAC Enterprise license on a R640 server.
Which license type is then enabled?
- A . iDRAC Express license
- B . iDRAC will not have a license until a new one is installed
- C . iDRAC Basic license
- D . iDRAC Enterprise license cannot be deleted
A server has two 1100w power supplies. The system needs to enable or disable power supplies dynamically depending on power needs. Power Supply 2 needs to be main power supply.
Which two settings should the technician change? (Choose two.)
- A . Set Default Power Supply to PSU 2
- B . Enable Hot Spare for power supplies
- C . Set Primary Power Supply to PSU 2
- D . Set Power Cap to 1100w for the system
- E . Enable Power Factor Correction
On a PowerEdge R640 server, the System Lockdown mode has been enabled. Certain features are no longer available in the System BIOS utility or IDRAC GUI.
Which other feature is no longer available?
- A . OMSA
- B . Lifecycle Controller
- C . iSM
- D . Booting to a 32-bit OS
A server has a dead system board that a technician must replace. After replacing the new system board the technician finds that the user did not back up the server profile, although they did configure the Parts Replacement policy to restore the configuration and firmware revisions for any replaced parts.
After powering on the server with the new system board, the Easy Restore feature displays a window asking if the Easy restore configuration needs to be restored to the system board.
As the Parts Replacement policy had already been configured, the technician selects YES at the Easy Restore screen knowing that the parts Replacement policy will restore the remaining configurations. After powering on the server, the technician then finds that the parts not covered by Easy Restores have not been reconfigured.
What caused the reconfiguration process to stop?
- A . The technician did not back up the server profile upon arrival and before installing the new system board
- B . Configuration data used by the Parts Replacement policy was stored in the Lifecycle Controller on the original system board
- C . The technician forgot to move the vFlash SD card from the old system board to the new system board
- D . Easy Restore overrides the Parts Replacement policy
Which is responsible for controlling the NVMe disks, when using a Paddle Card in a PowerEdge 15G server?
- A . S150
- B . HBA355
- C . H745
A technician needs to update the iDRAC firmware from a USB key on a which cannot be rebooted.
What does the technician need to do to perform the update?
- A . Access the iDRAC, select System Update, select local as the Location Type, navigate to the USB key and select the iDRAC firmware and click the Reboot button
- B . Access the Lifecycle Controller, select Update and Rollback, select USB as the Location Type and select the iDRAC firmware
- C . Access the Lifecycle Controller, select iDRAC Settings, Select Update then select the iDRAC firmware
- D . Access the iDRAC, select System Update, select local as the Location Type, navigate to the USB key and select the iDRAC firmware
Which mobile devices are supported by Quick Sync in 13G Dell EMC PowerEdge servers?
- A . Android devices only
- B . iOS and Android devices only
- C . iOS devices only
- D . iOS, Android, and Windows Phone devices
168.0.120 (/24)
. Gateway: 192.168.0.1
. DNS Server 1: 10.10.0.1
. DNS Server 2: 10.10.0.2
Step-by-Step Guide:
Access iDRAC Network Settings:
Log into the iDRAC interface.
Go to the iDRAC Settings tab in the top menu.
Select Network from the dropdown options. This will open the network configuration page.
Change IP Address and Subnet Mask:
In the Network settings, locate the section for IPv4 Settings.
Set the IP Address to 192.168.0.120.
For the Subnet Mask, since it’s a /24 CIDR, set it to 255.255.255.0.
Configure the Gateway:
In the same section, find the field for Default Gateway.
Enter the Gateway as 192.168.0.1.
Update DNS Server Information:
Scroll down to the DNS Server settings.
Enter DNS Server 1 as 10.10.0.1.
Enter DNS Server 2 as 10.10.0.2.
Apply the Settings:
After entering all the new network information, click on Apply or Save to confirm the changes. The iDRAC interface may prompt for a restart to apply network changes.
Follow any prompts as needed.
Verify the Configuration:
After applying the changes, check that the iDRAC is accessible at the new IP address 192.168.0.120. Confirm that the gateway and DNS settings are properly configured by testing connectivity or accessing the iDRAC from a device within the same network segment.
By completing these steps, you will have reconfigured the iDRAC network settings for the new network segment, allowing remote management of the Dell PowerEdge server at the edge location.