Practice Free CWDP-305 Exam Online Questions
When performing a spectrum analysis walkthrough of a facility tor which you will be creating a WLAN design you detect an interferer What should you do?
- A . Make a mental note of it so that you can include it in your design
- B . Make note of it using the reporting features of your spectrum analyzer or by documenting it elsewhere
- C . Locate and remove the interferer immediately so that your WLAN works well
- D . Walk away from the project because it is best to only deploy in clean environments with no other RF signals
When performing a spectrum analysis walkthrough of a facility tor which you will be creating a WLAN design you detect an interferer What should you do?
- A . Make a mental note of it so that you can include it in your design
- B . Make note of it using the reporting features of your spectrum analyzer or by documenting it elsewhere
- C . Locate and remove the interferer immediately so that your WLAN works well
- D . Walk away from the project because it is best to only deploy in clean environments with no other RF signals
A museum wants to offer Wi-Fi to its visitors. One of their requirements is to have the APs blend into the design of the museum.
What should you do to meet this requirement?
- A . Use a plastic cover that could blend in with the environment
- B . Lock the AP inside of a metal box
- C . Place the APs in between walls and I-beams
- D . Use an 802.11b AP, so it looks old enough to be in a museum
A museum requires its wireless access points to be discreetly integrated into the environment without sacrificing performance.
Which design choice best meets this requirement while maintaining optimal functionality?
- A . Lock the AP inside of a metal box
- B . Place the APs in between walls and I-beams
- C . Use an 802.11b AP, so it looks old enough to be in a museum
- D . Use a plastic cover that could blend in with the environment
What frequency and power did 802.11y provide?
- A . 3.65C3.7 GHz, 20W EIRP
- B . 5.65C5.7 GHz, 5W EIRP
- C . 5.25C5.35 GHz, 10W EIRP
- D . 3.7C3.75 GHz, 15W EIRP
What single tool, by design can be used to verify channel selection, encryption in use and number of APs above a specified signal threshold in a given location during deployment?
- A . Spectrum analyzer
- B . Spreadsheet
- C . WLAN scanner
- D . Throughput tester
When deploying a new WLAN infrastructure using Power over Ethernet (PoE) to power the access points (APs), you find that a known good AP is not powering up. You connect your laptop using the same cable without any issues.
What is the most likely reason the AP did not power up?
- A . Missing AP licenses on the controller
- B . Spanning-tree convergence
- C . Layer 3 routing
- D . Lack of PoE budget on the switch
What important item is often left out of operational and maintenance plans?
- A . Syslog analysis
- B . Network overview
- C . Engineering feedback
- D . Configuration backups
When live video streaming solutions that transmit simultaneously to more than one recipient are used, what special capability should be considered and configured in all affected WLAN implementations?
- A . IPSec
- B . IPv6
- C . Multicasting
- D . Secure TCP
A controller-based WLAN infrastructure has its controller on a different subnet than its access points (APs).
What device must be used to enable communication between the controller and the APs?
- A . NTP server
- B . Router
- C . PoE Layer 2 switch
- D . Wireless bridge