Practice Free CWDP-305 Exam Online Questions
Your customer requires fast secure roaming.
Which two types of roaming are specified in 802.11-2016 FT roaming that will help meet this goal?
- A . Over-the-Air and Over-the-DS
- B . Over-the-Air and Over-the-Wire
- C . FT and OKC
- D . FT and TKIP
A signal passes through a 10-meter cable, an amplifier, and then a filter. The amplifier has an output that is eight times higher in power than its input. Each meter of cable reduces the signal level by a factor of 4. The filter has a loss of 5 dB.
What is the total loss/gain of the three elements in series?
- A . 65 dB loss
- B . 16 dB gain
- C . 56 dB loss
- D . 37 dB loss
A museum wants to offer Wi-Fi to its visitors. One of their requirements is to have the APs blend into the design of the museum.
What should you do to meet this requirement? A. Use a plastic cover that could blend in with the environment
B. Lock the AP inside of a metal box
C. Place the APs in between walls and I-beams
D. Use an 802.11b AP, so it looks old enough to be in a museum
Answer: A
19 1. An MSA commonly addresses at least which two legal categories?
- A . Nondisclosure agreement
- B . Hold harmless
- C . Intellectual property protection
- D . Indemnity clause
A customer wants to deploy a WLAN that employs centralized forwarding.
What LAN requirements should you look for?
- A . High-speed Ethernet links
- B . Layer 3 at the access layer
- C . Layer 2 at the distribution layer
- D . Routing redundancy protocol
When performing an active site survey in an existing WLAN infrastructure, in addition to gathering throughput data, what other important function will you typically be testing at the same time?
- A . Application filtering
- B . Internet bandwidth
- C . Roaming
- D . ACL configuration
You are planning for client devices in a WLAN that is be upgraded to 802.11ac.
Which one of the following devices is more likely to have support for 3×3:3 radios and 256 QAM?
- A . handheld scanner
- B . tablet
- C . laptop
- D . USB 2.0 adapter
- E . mobile phone
During a public Wi-Fi session with 10 other users, you run a ping sweep but cannot detect any devices on your subnet.
What feature is likely enabled on the WLAN infrastructure to prevent local communication between clients?
- A . Peer-to-peer blocking
- B . OSPF external routes
- C . Band steering
- D . Load balancing
While using a USB adapter attached to a USB hub and your laptop for protocol analysts you notice that the SNR is lower than expected. The USB adapter is an 802 11 ac 3×3 3 adapter and is connected to a USB 3 hub.
What is likely causing the SNR variation?
- A . USB 20 interference
- B . USB 3 0 interference
- C . EMI from the battery in the device
- D . RF incidental energy generated by the cooling fans in the laptop
If radar has reportedly been detected on your WLAN deployment, what bands would you consider
avoiding?
- A . 5 GHz UNII-2 and 2e
- B . 5 GHz UNII-2 and 3
- C . 5 GHz UNII-2, 2e, and 3
- D . 5 GHz UNII-1 and 2
- E . 5 GHz UNII-1, 2, and 3
In a convention center, you have received complaints about the WLAN infrastructure. At this moment, the are only two APs in one auditorium.
After analyzing the situation, you determined that there are more client devices that the infrastructure was designed for. There are only two APs to support more than 300 devices using the Wi-Fi at the same time.
What should you do to make the Wi-Fi work as expected?
- A . Redesign the entire WLAN
- B . Upgrade the Ethernet connections to MultiGig
- C . Quickly add more APs
- D . Turn up the output power on the APs so that they can handle more clients
A
29 1. What are some advantages of designing guest access with all guest users tunneled directly into the
DMZ?