Practice Free API-1184 Exam Online Questions
Question #11
What is the main purpose of the ANSI Z49.1 standard?
- A . To ensure efficient welding operations
- B . To provide guidelines for equipment design
- C . To protect persons and property from hazards related to welding
- D . To establish welding certification procedures
Correct Answer: C
Question #12
What is the primary function of an oil mist console?
- A . To produce oil mist for lubrication
- B . To control the flow of gas in machinery
- C . To regulate the ambient temperature of machinery
- D . To facilitate machinery installation activities
Correct Answer: A
Question #13
What is a permit-required confined space in pipeline construction?
- A . Any space that requires a construction permit
- B . A space that requires a special permit for access
- C . A confined space that has restricted means of entry or exit
- D . A space with limited means of entry or exit and specific hazards
Correct Answer: D
Question #14
According to API RP 540, where can more detailed discussions about the classification of locations be found?
- A . API RP 540
- B . NFPA 70
- C . API RP 500 and API RP 505
- D . API RP 552
Correct Answer: C
Question #15
Which organization provides the “ISO 19232-15” standard referenced in API 1104?
- A . American Welding Society (AWS)
- B . International Organization for Standardization (ISO)
- C . NACE International
- D . British Standards Institution (BSI)
Correct Answer: B
Question #16
What does “ICP” stand for in API 1104?
- A . International Certification Process
- B . Internal Corrosion Prevention
- C . Inadequate Cross Penetration
- D . Inspection and Control Procedure
Correct Answer: D
Question #17
What is a ditch plug used for in pipeline construction?
- A . To prevent erosion around the pipeline
- B . To facilitate access into a pipeline
- C . To block the flow of water in a pipeline trench
- D . To provide structural support to the pipeline
Correct Answer: C
Question #18
Which of the following is NOT excluded from the scope of ANSI Z49.1?
- A . Building piping systems
- B . Pipeline protection systems
- C . Building electrical installations
- D . Bulk gas supply systems
Correct Answer: D
Question #19
What is the definition of a combustible liquid according to NFPA 30?
- A . Liquids with flash points below 37.8°C (100°F)
- B . Liquids with flash points at or above 37.8°C (100°F)
- C . Liquids with vapor pressures below 276 kPa at 37.8°C (100°F)
- D . Liquids with boiling points below 60°C (140°F)
Correct Answer: B
Question #20
Which types of provisions were deleted in the revised scope of ANSI Z49.1?
- A . Safety measures for equipment manufacturing
- B . Building design and construction guidelines
- C . Facility pipelines and electrical installations
- D . Welding certification procedures
Correct Answer: C