Practice Free 71301T Exam Online Questions
Question #20
The media stream in WebRTC is anchored on which Avaya Aura® component?
- A . Avaya Aura® Media Gateway G430/G450
- B . Avaya Aura® Media Server (AAMS)
- C . No DSP Resources are required
- D . G650 Medpro
Correct Answer: B
B
Explanation:
The Avaya WebRTC Snap-in enables users inside or outside the Enterprise to make a secure call from their web browser to any endpoint to which Avaya Aura® can deliver calls.
The WebRTC Snap-in supports 1800 simultaneous calls at a rate of 28,000 BHCC in the following deployment model:
1 Avaya Breeze server
1 Avaya Session Border Controller for Enterprise (Avaya SBCE) server
8 Avaya Aura Media Servers
References: Avaya WebRTC Snap-in Reference, Release 3.1 (May 2016), page 26 https://downloads.avaya.com/css/P8/documents/101013939
B
Explanation:
The Avaya WebRTC Snap-in enables users inside or outside the Enterprise to make a secure call from their web browser to any endpoint to which Avaya Aura® can deliver calls.
The WebRTC Snap-in supports 1800 simultaneous calls at a rate of 28,000 BHCC in the following deployment model:
1 Avaya Breeze server
1 Avaya Session Border Controller for Enterprise (Avaya SBCE) server
8 Avaya Aura Media Servers
References: Avaya WebRTC Snap-in Reference, Release 3.1 (May 2016), page 26 https://downloads.avaya.com/css/P8/documents/101013939
Question #22
Which four kinds of services does the TSAPI standard provide for third-party call control over Avaya Aura® Communication Manager (CM)? (Choose four.)
- A . receiving notifications of events
- B . controlling specific calls or stations
- C . invoking CM features
- D . performing a remote reboot to the CM server
- E . completing the routing of incoming calls
- F . adding new feature buttons to agent sets
Correct Answer: A,B,C,E
A,B,C,E
Explanation:
A: The services in the Event Report group provide a client application with the reports of events that cause a change in the state of a call, a connection, or a device.
B: The services in the call control group enable a telephony client application to control a call or connection on Communication Manager. Typical uses of these services are: placing calls from a device
controlling a connection for a single call.
C: The services in the query group allow a client to query device features and static attributes of a Communication Manager device.
E: The services in the routing group allow Communication Manager to request and receive routing instructions for a call from a client application.
References: Avaya Aura® Application Enablement Services TSAPI for Avaya Communication Manager Programmer’s Reference Release 6.1, page 128 https://downloads.avaya.com/css/P8/documents/100141354
A,B,C,E
Explanation:
A: The services in the Event Report group provide a client application with the reports of events that cause a change in the state of a call, a connection, or a device.
B: The services in the call control group enable a telephony client application to control a call or connection on Communication Manager. Typical uses of these services are: placing calls from a device
controlling a connection for a single call.
C: The services in the query group allow a client to query device features and static attributes of a Communication Manager device.
E: The services in the routing group allow Communication Manager to request and receive routing instructions for a call from a client application.
References: Avaya Aura® Application Enablement Services TSAPI for Avaya Communication Manager Programmer’s Reference Release 6.1, page 128 https://downloads.avaya.com/css/P8/documents/100141354
Question #23
To log on the one-X® Communicator to Avaya Aura® Presence Services server, what do you enter in the IM and Presence / Server field of the one-X® Communicator?
- A . the management IP-Address of FQDN of Avaya Breeze™ server
- B . the management IP-Address of FQDN of Avaya Aura® Session Manager (SM)
- C . the SM100 IP-Address of FQDN of Avaya Aura® Session Manager (SM)
- D . the SM100 IP-Address or FQDN of Avaya Breeze™ server
Correct Answer: C
C
Explanation:
The SIP one-X Communicator needs to be configured to use a specific protocol and port when registering to Session Manager.Enter the IP address of the Session Manager virtual SM-100 card for Session Manager SIP Element.
References: Application Notes for Configuring Avaya AuraTM Presence Services 6.0 with Avaya AuraTM Session Manager 6.0, and Avaya AuraTM Communication Manager for one-XTM Communicator clients as part of Avaya Unified Communication Mobile Worker Solution C Issue 1.0, page 30 https://www.devconnectprogram.com/fileMedia/download/dba93412-03c6-4fda-8d6a-280ae2193d6f
C
Explanation:
The SIP one-X Communicator needs to be configured to use a specific protocol and port when registering to Session Manager.Enter the IP address of the Session Manager virtual SM-100 card for Session Manager SIP Element.
References: Application Notes for Configuring Avaya AuraTM Presence Services 6.0 with Avaya AuraTM Session Manager 6.0, and Avaya AuraTM Communication Manager for one-XTM Communicator clients as part of Avaya Unified Communication Mobile Worker Solution C Issue 1.0, page 30 https://www.devconnectprogram.com/fileMedia/download/dba93412-03c6-4fda-8d6a-280ae2193d6f
Question #23
To log on the one-X® Communicator to Avaya Aura® Presence Services server, what do you enter in the IM and Presence / Server field of the one-X® Communicator?
- A . the management IP-Address of FQDN of Avaya Breeze™ server
- B . the management IP-Address of FQDN of Avaya Aura® Session Manager (SM)
- C . the SM100 IP-Address of FQDN of Avaya Aura® Session Manager (SM)
- D . the SM100 IP-Address or FQDN of Avaya Breeze™ server
Correct Answer: C
C
Explanation:
The SIP one-X Communicator needs to be configured to use a specific protocol and port when registering to Session Manager.Enter the IP address of the Session Manager virtual SM-100 card for Session Manager SIP Element.
References: Application Notes for Configuring Avaya AuraTM Presence Services 6.0 with Avaya AuraTM Session Manager 6.0, and Avaya AuraTM Communication Manager for one-XTM Communicator clients as part of Avaya Unified Communication Mobile Worker Solution C Issue 1.0, page 30 https://www.devconnectprogram.com/fileMedia/download/dba93412-03c6-4fda-8d6a-280ae2193d6f
C
Explanation:
The SIP one-X Communicator needs to be configured to use a specific protocol and port when registering to Session Manager.Enter the IP address of the Session Manager virtual SM-100 card for Session Manager SIP Element.
References: Application Notes for Configuring Avaya AuraTM Presence Services 6.0 with Avaya AuraTM Session Manager 6.0, and Avaya AuraTM Communication Manager for one-XTM Communicator clients as part of Avaya Unified Communication Mobile Worker Solution C Issue 1.0, page 30 https://www.devconnectprogram.com/fileMedia/download/dba93412-03c6-4fda-8d6a-280ae2193d6f
Question #23
To log on the one-X® Communicator to Avaya Aura® Presence Services server, what do you enter in the IM and Presence / Server field of the one-X® Communicator?
- A . the management IP-Address of FQDN of Avaya Breeze™ server
- B . the management IP-Address of FQDN of Avaya Aura® Session Manager (SM)
- C . the SM100 IP-Address of FQDN of Avaya Aura® Session Manager (SM)
- D . the SM100 IP-Address or FQDN of Avaya Breeze™ server
Correct Answer: C
C
Explanation:
The SIP one-X Communicator needs to be configured to use a specific protocol and port when registering to Session Manager.Enter the IP address of the Session Manager virtual SM-100 card for Session Manager SIP Element.
References: Application Notes for Configuring Avaya AuraTM Presence Services 6.0 with Avaya AuraTM Session Manager 6.0, and Avaya AuraTM Communication Manager for one-XTM Communicator clients as part of Avaya Unified Communication Mobile Worker Solution C Issue 1.0, page 30 https://www.devconnectprogram.com/fileMedia/download/dba93412-03c6-4fda-8d6a-280ae2193d6f
C
Explanation:
The SIP one-X Communicator needs to be configured to use a specific protocol and port when registering to Session Manager.Enter the IP address of the Session Manager virtual SM-100 card for Session Manager SIP Element.
References: Application Notes for Configuring Avaya AuraTM Presence Services 6.0 with Avaya AuraTM Session Manager 6.0, and Avaya AuraTM Communication Manager for one-XTM Communicator clients as part of Avaya Unified Communication Mobile Worker Solution C Issue 1.0, page 30 https://www.devconnectprogram.com/fileMedia/download/dba93412-03c6-4fda-8d6a-280ae2193d6f
Question #23
To log on the one-X® Communicator to Avaya Aura® Presence Services server, what do you enter in the IM and Presence / Server field of the one-X® Communicator?
- A . the management IP-Address of FQDN of Avaya Breeze™ server
- B . the management IP-Address of FQDN of Avaya Aura® Session Manager (SM)
- C . the SM100 IP-Address of FQDN of Avaya Aura® Session Manager (SM)
- D . the SM100 IP-Address or FQDN of Avaya Breeze™ server
Correct Answer: C
C
Explanation:
The SIP one-X Communicator needs to be configured to use a specific protocol and port when registering to Session Manager.Enter the IP address of the Session Manager virtual SM-100 card for Session Manager SIP Element.
References: Application Notes for Configuring Avaya AuraTM Presence Services 6.0 with Avaya AuraTM Session Manager 6.0, and Avaya AuraTM Communication Manager for one-XTM Communicator clients as part of Avaya Unified Communication Mobile Worker Solution C Issue 1.0, page 30 https://www.devconnectprogram.com/fileMedia/download/dba93412-03c6-4fda-8d6a-280ae2193d6f
C
Explanation:
The SIP one-X Communicator needs to be configured to use a specific protocol and port when registering to Session Manager.Enter the IP address of the Session Manager virtual SM-100 card for Session Manager SIP Element.
References: Application Notes for Configuring Avaya AuraTM Presence Services 6.0 with Avaya AuraTM Session Manager 6.0, and Avaya AuraTM Communication Manager for one-XTM Communicator clients as part of Avaya Unified Communication Mobile Worker Solution C Issue 1.0, page 30 https://www.devconnectprogram.com/fileMedia/download/dba93412-03c6-4fda-8d6a-280ae2193d6f
Question #23
To log on the one-X® Communicator to Avaya Aura® Presence Services server, what do you enter in the IM and Presence / Server field of the one-X® Communicator?
- A . the management IP-Address of FQDN of Avaya Breeze™ server
- B . the management IP-Address of FQDN of Avaya Aura® Session Manager (SM)
- C . the SM100 IP-Address of FQDN of Avaya Aura® Session Manager (SM)
- D . the SM100 IP-Address or FQDN of Avaya Breeze™ server
Correct Answer: C
C
Explanation:
The SIP one-X Communicator needs to be configured to use a specific protocol and port when registering to Session Manager.Enter the IP address of the Session Manager virtual SM-100 card for Session Manager SIP Element.
References: Application Notes for Configuring Avaya AuraTM Presence Services 6.0 with Avaya AuraTM Session Manager 6.0, and Avaya AuraTM Communication Manager for one-XTM Communicator clients as part of Avaya Unified Communication Mobile Worker Solution C Issue 1.0, page 30 https://www.devconnectprogram.com/fileMedia/download/dba93412-03c6-4fda-8d6a-280ae2193d6f
C
Explanation:
The SIP one-X Communicator needs to be configured to use a specific protocol and port when registering to Session Manager.Enter the IP address of the Session Manager virtual SM-100 card for Session Manager SIP Element.
References: Application Notes for Configuring Avaya AuraTM Presence Services 6.0 with Avaya AuraTM Session Manager 6.0, and Avaya AuraTM Communication Manager for one-XTM Communicator clients as part of Avaya Unified Communication Mobile Worker Solution C Issue 1.0, page 30 https://www.devconnectprogram.com/fileMedia/download/dba93412-03c6-4fda-8d6a-280ae2193d6f
Question #28
The WebRTC snap-in needs to be loaded on which of Avaya Breeze™ cluster?
- A . Context Store EDP Cluster
- B . Core Platform EDP Cluster
- C . General Purpose EDP Cluster
- D . Work Assignment EDP Cluster
Correct Answer: B
B
Explanation:
A cluster profile is a pre-loaded template that contains cluster attributes.
The Core Platform cluster profile: A closed cluster that supports up to 10 Avaya Breeze servers.
B
Explanation:
A cluster profile is a pre-loaded template that contains cluster attributes.
The Core Platform cluster profile: A closed cluster that supports up to 10 Avaya Breeze servers.
Question #29
On Avaya Session Border Controller for Enterprise (SBCE), which two ways can be used to view System Logs? (Choose two.)
- A . from CLI execute cat > var > log > Avaya > syslog
- B . from System Manager web GUI > Alarms and Events
- C . from CLI execute cat archive > syslog > ipcs.log
- D . from EMS web GUI SBCE Dashboard access Logs > System Logs
Correct Answer: C,D
C,D
Explanation:
C: Call Trace data are written to this location:
C /archive/syslog/ipcs/octeon.log
D: Viewing system logsProcedure
C,D
Explanation:
C: Call Trace data are written to this location:
C /archive/syslog/ipcs/octeon.log
D: Viewing system logsProcedure
Question #29
On Avaya Session Border Controller for Enterprise (SBCE), which two ways can be used to view System Logs? (Choose two.)
- A . from CLI execute cat > var > log > Avaya > syslog
- B . from System Manager web GUI > Alarms and Events
- C . from CLI execute cat archive > syslog > ipcs.log
- D . from EMS web GUI SBCE Dashboard access Logs > System Logs
Correct Answer: C,D
C,D
Explanation:
C: Call Trace data are written to this location:
C /archive/syslog/ipcs/octeon.log
D: Viewing system logsProcedure
C,D
Explanation:
C: Call Trace data are written to this location:
C /archive/syslog/ipcs/octeon.log
D: Viewing system logsProcedure