Practice Free 350-401 Exam Online Questions
Which controller is the single plane of management for Cisco SD-WAN?
- A . vBond
- B . vEdge
- C . vSmart
- D . vManage
Which language can be used to model configuration and state data?
- A . JSON
- B . XML
- C . XDR
- D . YANG
A corporate policy mandates that a certificate-based authentication system must be implemented on the wireless infrastructure. All corporate clients will contain a certificate that will be used in conjunction with ISE and user credentials to perform authentication before the clients are allowed to connect to the corporate Wi-Fi.
Which authentication key option must be selected to ensure that this authentication can take place?
- A . none
- B . PSK
- C . 802.1x
- D . CCKM
What is one characteristic of an AP that is operating in Mobility Express mode?
- A . It is recommended for large scale deployments.
- B . It requires a centralized WLC.
- C . At least three APs are needed for WLC redundancy.
- D . It requires an AP to act as a WLC.
Which two actions are recommended as security best practices to protect REST API? (Choose two.)
- A . Use SSL for encryption.
- B . Enable out-of-band authentication.
- C . Enable dual authentication of the session.
- D . Use TACACS+ authentication.
- E . Use a password hash.
SIMULATION 18:
R30
Config t
router ospf 100
router-id 10.0.1.30
int ran lo0 , e0/0-1
ip ospf 100 a 0
exit
int et0/2
ip ospf 100 a 50
exit
router ospf 30
area 50 range 10.10.0.0 255.255.192.0
area 50 range 10.50.0.0 255.255.192.0
end
wr
What are two of benefits of using VXLAN? (Choose two.)
- A . It allows for an unlimited number of segments.
- B . It has fewer devices to manage.
- C . It uses all available Layer 3 paths in the underlying network.
- D . It allows multi-tenanted segmentation.
- E . It uses a MAC in IP/TCP encapsulation technique.
SIMULATION 19:
R30
Config t
router ospf 100
router-id 10.0.1.30
int ran lo0, e0/0-1
ip ospf 100 a 0
exit
int et0/2
ip ospf 100 a 50
exit
router ospf 30
area 50 range 10.10.0.0 255.255.192.0
area 50 range 10.50.0.0 255.255.192.0
end
wr
An engineer must configure a new 6 Ghz only SSID on a cisco catalyst 9800 series WLC, with these requirements:
Provide 802.11ax data rates for supported devices
All users authenticate using a certificate
Which wireless layer 2 security mode meets the requirements?
- A . WPA2 Enterprise
- B . WPA3 Personal
- C . WPA2 Personal
- D . WPA3 Enterprise
SIMULATION 23:
Sw10
config t
no int po20
int et0/0
channel-group 20 mode active
no shut
spanning-tree vlan 20 pri 0
wr
Verification:
