Practice Free 350-401 Exam Online Questions
Which tag defines the roaming domain and properties of an AP deployment?
- A . RF tag
- B . policy tag
- C . site tag
- D . AP tag
What is the calculation that is used to measure the radiated power of a signal after it has gone through the radio, antenna cable, and antenna?
- A . EIRP
- B . mW
- C . dBm
- D . dBi
SIMULATION
R2
config t
username NetworkAdmin privilege 15 password CiscoENCOR
line vty 0 4
login local
transport input telnet rlogin
exec-timepit 20
Refer to the exhibit.
An engineer deploys a script to retrieve the running configuration from a NETCONF-capable Cisco IOS XE device that Is configured with default settings. The script fails.
Which configuration must be applied to retrieve the configuration using NETCONF?
- A . Option A
- B . Option B
- C . Option C
- D . Option D
How is Layer 3 roaming accomplished in a unified wireless deployment?
- A . An EoIP tunnel is created between the client and the anchor controller to provide seamless connectively as the client is associated with the new AP.
- B . The client entry on the original controller is passed to the database on the new controller.
- C . The new controller assign an IP address from the new subnet to the client.
- D . The client database on the original controller is updated with the anchor entry, and the new controller database is updated with the foreign entry.
A customer requests a design that includes GLBP as the FHRP. The network architect discovers that the members of the GLBP group have different throughput capabilities.
Which GLBP load balancing method supports this environment?
- A . host dependent
- B . weighted
- C . least connection
- D . round robin
What is a characteristics of Wi-Fi channels?
- A . The 2 4-GHz balWMS§24 non-overlapping channels
- B . Devices that connect to the same Wi-Fi channel reside in the same collision domain.
- C . Wi-Fi channels are spaced 30 MHz apart.
- D . The 5-GHz band offers 11 different channels for Wi-Fi clients
SIMULATION 22:
Config t
no int po1
default int ran et0/0-2
int ran e0/0-2
switchport trunk encap dot1q
switchport mode trunk
channel-group 1 mode active
no shut
wr
SIMULATION 14:
R1
Config t
Flow exporter Export-NetFlowENCOR
destination 10.10.1.110
transport udp 2055
exit
flow moni Monitor-NetFlowENCOR
exit
ip sla 1
http get http://10.10.1.100
frequ 300
exit
ip sla schedule 1 life forever start-time now
wr
SW1
Config t
Monitor session 7 source interface e0/0
Monitor session 7 destination interface e1/1
End
Wr
DRAG DROP
Drag and drop the snippets onto the blanks within the code to construct a script that brings up the failover Ethernet port if the primary port goes down and also shuts down the failover port when the primary returns to service. Not all options are used.
