Practice Free 300-430 Exam Online Questions
A WLAN is being configured for guest access using the portal on the Cisco CMX.
Which Layer 3 security setting must be selected?
- A . Web-Policy-Conditional Redirect
- B . Web-Policy-Authentication
- C . Web-Policy-Splash Page Redirect
- D . Web-Policy-Passthrough
Branch wireless users report that they can no longer access services from head office but can access services locally at the site. New wireless users can associate to the wireless while the WAN is down.
Which three elements (Cisco FlexConnect state, operation mode, and authentication method) are seen in this scenario? (Choose three.)
- A . authentication-local/switch-local
- B . WPA2 personal
- C . authentication-central/switch-central
- D . lightweight mode
- E . standalone mode
- F . WEB authentication
Refer to the exhibit.
A customer has implemented Cisco FlexConnect deployments with different WLANs around the globe and is opening a new branchin a different location. The engineer’s task is to execute all the wireless configuration and to suggest how to configure the switch ports for new APs.
Which configuration must the switching team use on the switch port?
- A . trunk mode
- B . access mode
- C . single VLAN
- D . multiple VLAN
An engineer implemented AP Authorization with Cisco ISE utilizing AP MAC addresses as local users in Cisco ISE. Everything has been working fine until recently. It has been noticed that APs that reboot are temporarily disconnected from the network and cannot rejoin the controller.
Which action completes the implementation?
- A . Remove APs from the exclusion list, due to authentication failures.
- B . Disable the Cisco ISE password policy that disables accounts for unchanged passwords.
- C . Install a valid EAP certificate on Cisco ISE for the APs.
- D . Upgrade Cisco ISE to a newer version due to bugs.
What is the Cisco recommended configuration for a Cisco switch port connected to an AP in local mode for optimal voice over WLAN performance with an 8821 wireless phone?
- A . switchport encapsulation dot1q
switchport mode trunk
mlsqos trust device cisco-phone - B . switchport mode access
mlsqos trust device cisco-phone - C . switchport mode access mlsqos trust cos
- D . switchport mode access mlsqos trust dscp
D
Explanation:
Reference: https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cuipph/8821/english/Deployment/8821_wlandg.pdf
An engineer is adding APs to an existing VolMLAN to allow for location based services.
Which option will the primary change be to the network?
- A . increased transmit power on all APs
- B . moving to a bridging model
- C . AP footprint
- D . cell overlap would decrease
- E . triangulation of devices
A network engineer created a new wireless network that will be used for guest access. The corporate network must utilize all rates. The guest network must use only lower rates instead of 802.11n data rates.
To what must the WMM policy of the WLAN be set to accomplish this task?
- A . required
- B . allowed
- C . disabled
- D . mandatory
A customer managing a large network has implemented location services. Due to heavy load, it is needed to load balance the data coming throughNMSP from the WLCs. Load must be spread between multiple CMX servers to help optimize the data flow for APs.
Which configuration in CMX meets this requirement?
- A . cmxctl config feature flags nmsplb.cmx-ap-grouping true
- B . cmxctl config feature flags nmsplb.cmxgrouping true
- C . cmxctl config feature flags nmsplb.cmx-loadbalance true
- D . cmxctl config feature flags nmsplb.cmx-rssi-distribute true
B
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/mse/10-6/cmx_command/cmxcli106/cmxcli1051_chapter_010.html#wp7273815000
https://www.cisco.com/c/en/us/support/docs/wireless/connected-mobile-experiences/214894-optimize-cmx-performance.html
A company wants to utilize the wireless network to push videos to wireless clients. An engineer has been hired to configure a Cisco WLC to notify users when it cannot provide a video stream while using the Multicast Direct Feature.
Which settings must be enabled for this functionality?
- A . Session Announcement State
- B . Message of the Day
- C . SNMP Trap log
- D . Northbound Notification
An engineer is planning an image upgrade of the WLC, and hundreds of APs are spread across remote sites with limited WAN bandwidth. The engineer must minimize the WAN utilization for this upgrade.
Which approach must be used for the AP image upgrade?
- A . Predownload the new code to the APs.
- B . Use the Smart AP image upgrade feature.
- C . Allow the APs to download their code after WLC reboot.
- D . Execute parallel TFTP code upgrade on the APs via SSH.