Practice Free 300-430 Exam Online Questions
A new MSE with wIPS service has been installed and no alarm information appears to be reaching the MSE from controllers.
Which protocol must be allowed to reach the MSE from the controllers?
- A . SOAP/XML
- B . NMSP
- C . CAPWAP
- D . SNMP
What is the default NMSP echo interval between Cisco MSE and a Wireless LAN Controller?
- A . 10 seconds
- B . 15 seconds
- C . 30 seconds
- D . 60 seconds
C
Explanation:
Reference: https://www.cisco.com/en/US/docs/wireless/mse/3350/6.0/CAS/configuration/guide/msecg_ch4_CAS.html
A customer is deploying Cisco Catalyst Center (formerly DNA Center) to manage a Cisco Catalyst 9800 Series Wireless Controller Cisco CleanAir is used to address wireless interference.
Which two configurations must be completed from the Cisco Catalyst Center GUI to manage the interferes? (Choose two)
- A . Enable Neighbor List Dual Band on the configured WLANs
- B . Disable Persistent Device Propagation in the CleanAir configuration model
- C . Configure the RX SOP threshold to be high
- D . Enable CleanAir Device Reporting in the CleanAir configuration model
- E . The CleanAir configuration model must be applied to a wireless network profile
A university implemented a Cisco Catalyst Center (formerly DNA Center) solution to help its network administrator resolve Wi-Fi issues that are raised by students. A client dashboard must be used to view, monitor, and troubleshoot the captured data packets.
Which feature must be used?
- A . Intelligent Capture
- B . Packet Sniffer
- C . Packet Capture
- D . Cisco CleanAir
A customer wants to allow employees to easily onboard their personal devices to the wireless network. The visitors also must be able to connect to the same network without the need to engage with anyone from the reception desk.
Which process must be configured on Cisco ISE to support thisrequirement?
- A . MAC authentication bypass
- B . native supplicant provisioning
- C . local web auth
- D . self-registration guest portal
An engineer needs to provision certificates on a Cisco Catalyst 9800 Series Wireless Controller. The customer uses a third-party CA server.
Which protocol must be used between the controller and CA server to request and install certificates?
- A . SCEP
- B . TLS
- C . LDAP
- D . SSL
A
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/trustpoints/b-configuring-trustpoints-on-cisco-catalyst-9800-series-controllers/c-workflow-to-configure-a-trustpoint-for-a-third-party-certificate-on-catalyst-9800.html
A customer wants the APs in the CEO’s office to have different usernames and passwords for administrative support than the other APs deployed throughout the facility.
Which feature must be enabled on the WLC and APs to achieve this goal?
- A . local management users
- B . HTTPS access
- C . 802.1X supplicant credentials
- D . override global credentials
A wireless network has been implemented to enable multicast video to be streamed reliably over the wireless link to the wireless users. After a clientreports that the video is unable to stream, the administrator determines that the client is connecting at a data rate of 12 Mbps and is trying to stream to a valid multicast address on the network.
Which two actions must be applied? (Choose two.)
- A . Turn off IGMP snooping for all the configured WLANs on the controller.
- B . Implement video-stream for the multicast video on the controller.
- C . Allow multicast-direct to work correctly and multicast-direct to be enabled globally.
- D . Change the WLAN QoS value to Bronze for the WLAN that multicast will be enabled.
- E . Allow RTSP to stream the video due to wireless multicast not using acknowledgements.
An engineer must configure MSE to provide guests access using social media authentication.
Which service does the engineer configure so that guests use Facebook credentials to authenticate?
- A . Social Connect
- B . Client Connect
- C . Visitor Connect
- D . Guest Connect
Which two steps are needed to complete integration of the MSE to Cisco Prime Infrastructure to track the location of clients/rogues on maps? (Choose two.)
- A . Synchronize access points with the MSE.
- B . Add the MSE to Cisco Prime Infrastructure using the CLI credentials.
- C . Add the MSE to Cisco Prime Infrastructure using the Cisco Prime Infrastructure communication credentials.
- D . Apply a valid license for Wireless Intrusion Prevention System.
- E . Apply a valid license for location tracking.