Practice Free 300-415 Exam Online Questions
Refer to the exhibit.
A user in the branch is connecting to Office 365 for the first time.
Over which path does the branch WAN Edge router traffic follow?
- A . routing table of the branch WAN Edge router
- B . DIA exit of the branch WAN Edge router
- C . forwarded to the gateway site
- D . dropped because the minimum vQoE score has not been met
Which SD-WAN component is configured to enforce a policy to redirect branch-to-branch traffic toward a network service such as a firewall or IPS?
- A . vBond
- B . WAN Edge
- C . vSmart
- D . Firewall
Which SD-WAN component is configured to enforce a policy to redirect branch-to-branch traffic toward a network service such as a firewall or IPS?
- A . vBond
- B . WAN Edge
- C . vSmart
- D . Firewall
An administrator is configuring the severity level on the vManage NMS for events that indicate that an action must be taken immediately.
Which severity level must be configured?
- A . warning
- B . error
- C . critical
- D . alert
D
Explanation:
Which alarm setting is configured to monitor serious events that affect but do not shut down, the operation of a network function?
- A . Minor
- B . Major
- C . Medium
- D . Critical
B
Explanation:
Reference: https://sdwan-docs.cisco.com/Product_Documentation/vManage_How-Tos/Troubleshooting/Monitor_Alarms
An engineer is configuring a shaping rate of 1 Mbps on the WAN link of a WAN Edge router.
Which configuration accomplishes this task’?
- A . Option A
- B . Option B
- C . Option C
- D . Option D
DRAG DROP
Drag and drop the Cisco SD-WAN components from the left onto their functions on the right.
Which device in the SD- WAN solution receives and categorizes event reports, and generates alarms?
- A . WAN Edge routers
- B . vSmart controllers
- C . vManage NMS
- D . vBond controllers
C
Explanation:
https://sdwan-docs.cisco.com/Product_Documentation/vManage_Help/Release_17.1/vManage_NMS_Product_Hel p
Which device in the SD- WAN solution receives and categorizes event reports, and generates alarms?
- A . WAN Edge routers
- B . vSmart controllers
- C . vManage NMS
- D . vBond controllers
C
Explanation:
https://sdwan-docs.cisco.com/Product_Documentation/vManage_Help/Release_17.1/vManage_NMS_Product_Hel p
When redistribution is configured between OMP and BGP at two Data Center sites that have Direct Connection interlink, which step avoids learning the same routes on WAN Edge routers of the DCs from LAN?
- A . Define different VRFs on both DCs
- B . Set same overlay AS on both DC WAN Edge routers
- C . Set down-bit on Edge routers on DC1
- D . Set OMP admin distance lower than BGP admin distance
B
Explanation:
